Guide for Enabling VGA and HDMI in Intel HD3000 GPU

Posted on Updated on

Guide for Enabling VGA and HDMI in Intel HD3000 GPU

Guide moved to new site:

http://osxarena.com/2015/03/guide-vga-hdmi-intel-hd3000-gpu/

Advertisements

6 thoughts on “Guide for Enabling VGA and HDMI in Intel HD3000 GPU

    hrdpgajjar said:
    June 13, 2015 at 5:11 pm

    hi sir,
    i’ve following specs,

    Gigabyte H61m- ww mother board
    3rd gen Intel core i 3 3220 processor
    On board intel HD 3000 graphics
    4 gb ddr3 ram
    500gb HDD

    OS : OS X Yosmite (hackintosh niresh distro)

    now can i use ur method to make my desktop mobo VGA port working ?

    please reply

    Thanks

    Like

    insanelydeepak responded:
    June 13, 2015 at 11:00 pm

    definitely but i have not tested it on Yosemite it was working pretty well with Maverivks and ML ,report result
    Good Luck

    Like

    hrdpgajjar said:
    July 2, 2015 at 12:30 pm

    hello sir,
    you have mentioned that this method will work on HD3000 with sandy bridge graphics, i’ve same with IVY bridge.

    does it works ?
    i’ve yosmite installed on my system..configured below,

    Gigabyte H61m ww mobo
    Intel Core i3 3220 processor
    4gb DDR3 ram
    500 GB HDD

    does it still works on my system?

    thanks in advance

    -Hardip

    Like

    insanelydeepak responded:
    July 12, 2015 at 11:17 am

    Yes Definitely this will work but you have to apply all patched and all …also have to change your IGPU Dev ID if required

    Good Luck

    Like

    moncastro said:
    September 10, 2015 at 6:04 pm

    What about HD4000, where can I make corrections? Or I can use the same guide?

    Like

    insanelydeepak responded:
    September 10, 2015 at 6:55 pm

    Yes definitely,
    Make backup before attempting

    Like

Comments are closed.